Màj Speedfan

[horus agressor]

Bonjour !

 

SpeedFan 4.33 http://www.almico.com/speedfan.php

 

Téléchargement : http://www.almico.com/sfdownload.php

 

Descriptif Zeb (v4.32) :

SpeedFan permet de surveiller ce qui se trame dans votre PC. Non content de contrôler la vitesse des ventilateurs en fonction de la température (ce qui permet de réduire le niveau sonore de votre machine), ce freeware vous indique également la température de vos disques durs. Il faut dans ce cas un disque qui propose le système S.M.A.R.T. Vous pourrez également changer la FSB sur certaines cartes mère. A noter que le contrôle de la vitesse des ventilateurs ne peut se faire que sur des cartes mères équipées de circuits intégrés appropriés (pas trop vielle donc).

http://telechargement.zebulon.fr/speedfan.html

Il y a également, dans le même genre, Motherboard Monitor 5.3.7.0 http://telechargement.zebulon.fr/motherboard-monitor.html

4.33 History

 

-completely rewritten the detection and the identification strategy of ITE IT871xF chips (fan readings are now ok)

 

-xAP support is now properly reenabled between sessions

 

-fixed context sensitive help (F1 key) on Windows Vista

 

-enabled, if needed, the SMBus on Intel ICH7 and ICH8-M

 

-added several checks to CPU usage routines, fixing a nasty issue where an error window appeared once every second

 

-added full support for ATI SB600 SMBus

 

-added full support for Intel ICH9 SMBus

 

-added full support for nVidia MCP55 SMBus

 

-added sull support for ADT7475

 

-added nVidia Control Panel access to read video card temperatures

 

-supported the IT8716F and the IT8718F hardware monitor at unusual addresses

 

-added some SMB scan exceptions for Compal 08A0

 

-SMBus address $15 no longer scanned on AOpen i975Xa-YDG

 

-fixed an issue that caused the DFI LP UT NF4 SLI-DR Venus to power off on program start

 

-added support for Fintek F71872F voltage readings

 

-IT8712F-J now uses two undocumented FAN DIVs

 

-speeded up Asus M2N32-SLI DELUXE program startup

 

-added detection of an unknown Fintek chip (to avoid false detection of other sensors at the same address)

 

-W83627EHF and W83627DHG now properly show SMARTFAN III in CONFIGURE / ADVANCED

 

-W83627EHF and W83627DHG can now change PWM TYPE from PWM to DC in CONFIGURE / ADVANCED

 

-fixed FAN DIVISOR settings for Winbond W83791D

 

-added PWM OUT BASE CLOCK selection for WINBOND W83627DHG, W83627EHF and W83627EHG

 

-warning temperature can now be set as high as 125C in CONFIGURE

http://www.almico.com/sfhistory.php

Amicalement.

[cyrilcvcf]

Bonjour,

 

Hé hé hé, déjà fait depuis quelques jours !

 

Amicalement.

[Vercingétorix II]

Salut,

Oui moi aussi, très bien ces petits utilitaires.

A recommander.

A+

[horus agressor]

Bonjour !

 

Depuis la màj de septembre 2007, ça faisait un sacré bail, mais c'est fait, la v4.34 est prête : SpeedFan 4.34 Final is online! http://www.almico.com/speedfan.php

4.34 - added full support for SiS964 SMBus

- added full support for SiS966 SMBus

- added full support for ULi M1575 SMBus

- added full support for VIA VT8237S SMBus

- added full support for VIA VT8251 SMBus

- added full support for nVidia MCP61 SMBus

- added full support to read internal temperatures on AMD K10 processors

- added native nVidia video card (up to, but excluding 8xxx) internal temperature reporting

- added full support for SMSC SCH5307

- added full support for F8000 temperatures and fan speeds

- added full support for SMSC EMCT03

- added full support for WINBOND W83793G, including ADVANCED options

- added support for Fintek F71782F hardware monitor at unusual addresses

- added support for Winbond W83627DHG at unusual addresses

- added support for ITE IT8726F hardware monitor at unusual addresses

- added support for a new stepping of the Andigilog aSC7621

- Winbond W83791D properly handles higher fan divisors for fan1, fan2 and fan3 and shows fan4 and fan5 too

- added SMSC LPC47M192 FAN DIVISOR settings in CONFIGURE / ADVANCED

- added full PWM support to SMSC LPC47B397, including settings in CONFIGURE / ADVANCED

- CONFIGURE now allows to go as low as -60C when selecting the DESIRED and WARNING levels to let users of the RELATIVE Intel Core temperature reading properly configure SpeedFan

- improved DDR2 memory module size detection

- added preliminary DDR3 identification

- new icon by Bengt Strom

- fixed an issue where Intel Core temperatures on multi core systems reported the same temperature for all cores

- improved Tjunction detection for Intel CORE temperatures (you might no longer need the temperature offset in CONFIGURE / ADVANCED)

- fixed crash on several DFI motherboards

- fixed the detection of older revisions of the ITE IT8705F

- restored the correct clock speed after resume from hibernation

- rewritten the logic of the usage of a synchronizer in the thread that reads CPU usage (this will fix the SpeedFan not exiting issue)

- address $2E on DFI motherboards is no longer scanned if the motherboard model starts with LP. If you have one of these models and you know that there should be a valid chip at that address, send me a SEND REPORT (INFO tab) with some NOTES

- fixed ADT7475 temperature readings when in offset 64 mode

- fixed a bug when changing the type of data to be charted

- mails sent by SpeedFan now properly separate headers and the body with a blank line

- fixed an issue with SUN 2864 motherboard

http://www.almico.com/speedfan.php

Amicalement.

[horus agressor]

Bonjour !

 

SpeedFan 4.35 : http://www.almico.com/sfdownload.php

 

Changelog : http://www.almico.com/sfhistory.php

 

Amicalement.

[horus agressor]

Bonjour !

 

SpeedFan 4.37 http://www.almico.com/speedfan.php

History 4.37

-fixed a bug where, after resuming from suspend, fan speeds were not really changed

-added full support for AMD CD5536 SMBus

-added identification of Fintek F75111R

-fixed an Exotics tab Access Violation

-fixed a bug that caused all of the EVENTS to be lost after entering CONFIGURE

http://www.almico.com/sfhistory.php