[Résolu] Problème de DD ?

[marc2006]

:gun:

 

T'es pas capable de copier coller ??

 

smartmoontools

 

ensuite

sudo smartctl -a /dev/sda

 

=)

Modifié le 3 janvier 2013 par marc2006

[Sparfell]

ubuntu@ubuntu:~$ sudo apt-get install smartctl smartmontools
Reading package lists... Done
Building dependency tree       
Reading state information... Done
W: Duplicate sources.list entry cdrom://This/multiboot/ubuntu111064/ oneiric/main i386 Packages (/var/lib/apt/lists/This_multiboot_ubuntu111064_dists_oneiric_main_binary-i386_Packages)
W: You may want to run apt-get update to correct these problems
E: Unable to locate package smartctl
ubuntu@ubuntu:~$ sudo apt-get install smartctm smartmontools
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package smartctm
ubuntu@ubuntu:~$ sudo apt-get install smartctm smartmontools
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package smartctm

Que ce soit smartctl ou smartctm .... copier coller ou pas ... marche pas

[marc2006]

Ah oui, faut lancer un

sudo apt-get update

avant

 

ensuite

sudo apt-get install smartmontools

 

Sinon, on verra demain pour un scan du DD dans la tour ... mais Zonk semble avoir raison, le DD a pris un coup =/

Modifié le 3 janvier 2013 par marc2006

[Sparfell]

et rien pour smartctl ?

[marc2006]

smartmontools est en fait le paquet principal qui contient pas mal d'outils dont smartctl

 

http://doc.ubuntu-fr.org/smartmontools

Modifié le 3 janvier 2013 par marc2006

[Sparfell]

aaaaa maaaarcheeuuuuuuuu

ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-12-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, [url=http://smartmontools.sourceforge.net]http://smartmontools.sourceforge.net[/url]

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA (Adv. Format)
Device Model:     WDC WD3200BPVT-22ZEST0
Serial Number:    WD-WXC1A70F9727
LU WWN Device Id: 5 0014ee 204d664c9
Firmware Version: 01.01A01
User Capacity:    320,072,933,376 bytes [320 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Thu Jan  3 22:33:21 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
				was never started.
				Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
				without error or no self-test has ever 
				been run.
Total time to complete Offline 
data collection: 		( 8400) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
				Auto Offline data collection on/off support.
				Suspend Offline collection upon new
				command.
				Offline surface scan supported.
				Self-test supported.
				Conveyance Self-test supported.
				Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
				power-saving mode.
				Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
				General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 100) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7035)	SCT Status supported.
				SCT Feature Control supported.
				SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 1 Raw_Read_Error_Rate     0x002f   161   158   051    Pre-fail  Always       -       30052
 3 Spin_Up_Time            0x0027   153   127   021    Pre-fail  Always       -       1308
 4 Start_Stop_Count        0x0032   094   094   000    Old_age   Always       -       6435
 5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
 7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
 9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       692
10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       907
191 G-Sense_Error_Rate      0x0032   001   001   000    Old_age   Always       -       689
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       44
193 Load_Cycle_Count        0x0032   181   181   000    Old_age   Always       -       59006
194 Temperature_Celsius     0x0022   106   096   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   191   000    Old_age   Always       -       10
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Conveyance offline  Completed: read failure       80%       650         157385441
# 2  Conveyance offline  Completed: read failure       80%       648         157385441
# 3  Short offline       Interrupted (host reset)      90%       590         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
   1        0        0  Not_testing
   2        0        0  Not_testing
   3        0        0  Not_testing
   4        0        0  Not_testing
   5        0        0  Not_testing
Selective self-test flags (0x0):
 After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[marc2006]

10 secteurs en attente ... c'était ça avant le problème ? Après tous tes tests d'error scan la semaine dernière tu as pas regardé par hasard ?

 

Sinon, un

sudo smartctl -t long /dev/sda

 

serait à faire je pense..

 

[Sparfell]

Tiens, le secteur 157385441 est apres le dernier douteux vu dans hdtune ... mais reste dans le zone de quarantaine. Et en tout cas, c est pas lui qui fait tourner dans le vide la restauration systeme

[marc2006]

sudo fdisk -l ?

 

A pas oublier de checker dans le Bios, la partition recovery si activée.

[Sparfell]

Non, apres le LLV, le disque etait clean ... jusqu au scan hdtune qui racontait :