Bios drive 0x80

[Bolulu]

quelqu'un peut m expliquer en langage clair

 

avec seatools j ai teste mon segate

 

dans les test ya 2 unites ??

 

Bios drive 0x80 160 GO et le DD physique

 

le DD passe au test

 

kézako le bios drive ???? qui echoue

 

SeaTools Desktop v3.00.07

Copyright © 2004 Kroll Ontrack Inc.

 

1/16/2005 @ 3:44 PM

 

The following information has been generated by SeaTools Desktop. Use

this information to help you recognize and resolve potential data access

problems.

 

 

System Information:

BIOS Date 11/15/04

Conventional Memory size 637 K

Extended Memory size 58532 K

IO Channel type PCI

 

 

 

Drive Information:

SIZE MODEL

--------- ---------------------

160 GB BIOS Drive 0x80

 

 

Serial Number = N/A

Int13 Num = 80, PHYS CHS = 0x0x0.

ParmTable CHS, Rsvd = 19457x255x63

 

PARTITION CYLINDER SIZE

---------- ------------ ----

# Type Start End MB

PRIMARY

1 NTFS 0 2549 20975

PRIMARY

2 NTFS 2550 19456 139073

 

 

Diagnostic Results:

 

90-Second Test Result: Passed

Recommendation:

The "Quick Test" is adequate for most situations.

Consider running the "Full Test" which

verifies each sector on the drive if you need to run a more

comprehensive diagnostic.

 

SMART Status Check Result: Unsupported

 

 

S.M.A.R.T., (S)elf (M)onitoring (A)nalysis and ®eporting (T)echnology, a built-in hard disk drive failure prediction method reports an 'Alert' if a problem has occurred. It reports 'Passed' if no problems are found and 'Unsupported' if a hard disk drive does not support S.M.A.R.T.

 

 

File Structure Test Result:

 

Partition 1 (NTFS (20.9 GB) ) Result: Failed with critical Errors

 

 

NOTE: Any report of possible errors in the file system tests are for

informational purposes only. We suggest you should consider testing with

the official file system diagnostic utilities for your operating system.

Seagate is not able to assist with troubleshooting or reviewing

file system test results.

 

Partition 2 (NTFS (139 GB) Disque_E) Result: Failed with critical Errors

 

 

NOTE: Any report of possible errors in the file system tests are for

informational purposes only. We suggest you should consider testing with

the official file system diagnostic utilities for your operating system.

Seagate is not able to assist with troubleshooting or reviewing

file system test results.

 

 

 

******************************************

 

 

Recommendation:

If you are not experiencing data loss and SeaTools reports File

System Structure errors, they may be caused by a lock-up or

failure to shutdown Windows correctly. Many times, these errors

may be repaired through normal system maintenance which

includes using the Windows provided "Defrag" and

"Scandisk / Chkdsk / Error Checking" utilities.

 

If you are experiencing a hardware error, you should isolate

the cause and replace the failing component. If you are unsure how

to proceed with repairs, contact a computer professional. After

completing any maintenance tasks, run SeaTools again to

verify that all errors have been repaired. If errors continue to

occur, the system may not be stable. Again, contact a computer

professional.

Modifié le 16 janvier 2005 par Bolulu

[KewlCat]

0x80 c'est l'adresse BIOS du premier disque dur.

 

J'ignore comment fonctionne le soft que tu as utilisé, mais il se pourrait qu'il fasse deux tests différents, l'un avec des appels directs au BIOS, l'autre avec les couches "normales" incluses dans le système d'exploitation...

[Bolulu]

utilitaire seagate qui permet de tester le DD

 

http://www.seagate.com/support/seatools/

 

on cree des disquettes (l une c'est un dos avec disque virtuel)

l autre le soft proprement dit

 

et tu as different test memoire carte controleur etc...

 

Appel direct au bios ???? du pC ?

ce qui dans mon cas voudrait dire que j ai un prob avec la carte controleur ?

[bronson]

Je ne sais pas si tu as un pb sur ton disque, mais ce qui est à peu près sûr c'est que Seatools ne lit pas le NTFS................voilà pourquoi les failure!!!

[KewlCat]

En effet...

We suggest you should consider testing with

the official file system diagnostic utilities for your operating system.

Tu as deux partitions NTFS sur ce disque ?

 

(pour en revenir aux appels BIOS (INT13), oui, le BIOS du PC...)

[Bolulu]

oui 2 partitions

 

Si sea Tools connait le NTFS

 

Compatible with NTFS,

FAT32 and FAT16 partitions for Windows XP/2000/NT/Me/98/95.

 

donc c'est mal barré ?

 

mais c'est le DD ou le controleur DD qui foire ?

[bronson]

AÎE !!!