Besoin d'être guidé pour une véritable utilisation de Linux

[KewlCat]

Peut-être un problème au niveau de l'USB (ehci ou uhci) ?

Est-ce que ton dongle apparait lorsque tu fais lsusb ?

[Xavprog]

name='KewlCat' date='vendredi 02 décembre 2005 à 18h58' post='620199']

Peut-être un problème au niveau de l'USB (ehci ou uhci) ?

Est-ce que ton dongle apparait lorsque tu fais lsusb ?

 

Bon j'ai fait pas mal de recherche....

Je m'était procuré ndiwrapper en l'installant à partir des cd de ma distribution (Mandrake 10.1 je le rappelle)

 

Or il s'agit de la version 0.9..... alors que mon dongle est reconnut qu'a partir de la version 1.1

 

J'ai alors téléchargé la dernière version stable : la 1.6

 

je l'installe :

 

[root@192 ndiswrapper-1.6]# make

make -C driver

make[1]: Entering directory `/home/xavier/ndiswrapper-1.6/driver'

make -C /lib/modules/2.6.8.1-12mdk/build SUBDIRS=/home/xavier/ndiswrapper-1.6/driver \

DRIVER_VERSION=1.6

make[2]: Entering directory `/usr/src/linux-2.6.8.1-12mdk'

Building modules, stage 2.

MODPOST

Warning: could not find versions for .tmp_versions/ndiswrapper.mod

make[2]: Leaving directory `/usr/src/linux-2.6.8.1-12mdk'

make[1]: Leaving directory `/home/xavier/ndiswrapper-1.6/driver'

make -C utils

make[1]: libusb-config : commande introuvable

make[1]: Entering directory `/home/xavier/ndiswrapper-1.6/utils'

** USB programming library "libusb" is not installed. It is needed for compiling load_fw_ar5523, which is required for loading firmware for Atheros USB driver. "libusb" can be downloaded from http://libusb.sourceforge.net.

make[1]: Leaving directory `/home/xavier/ndiswrapper-1.6/utils'

 

Malgrés un message m'indiquant que qu'il me manque libusb pour un truc Atheros

Pensant que sa ne me concerne pas je continut :

 

[root@192 ndiswrapper-1.6]# make install

: tout ce passe bien

 

iwconfig

lo no wireless extensions.

 

eth0 no wireless extensions.

 

Warning: Driver for device wlan0 recommend version 18 of Wireless Extension,

but has been compiled with version 16, therefore some driver features

may not be available...

 

wlan0 IEEE 802.11g ESSID:"WANADOO-82DB" Nickname:"localhost"

Mode:Managed Frequency:2.412GHz Access Point: 00:0E:9B:A9:99:A7

Bit Rate=36Mb/s Tx-Power:32 dBm

RTS thr=2432 B Fragment thr=2432 B

Encryption key:DFE4-5A00-0A82-65AB-A703-7F6F-DE Security mode:restricted

Power Management:off

Link Quality:100/100 Signal level:-67 dBm Noise level:-256 dBm

Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0

Tx excessive retries:0 Invalid misc:0 Missed beacon:0

 

sit0 no wireless extensions.

 

Apprament: Ma wireless extension (une extension)du kenrel) n'est pas à jour

je télécharge le dernier Wireless-Tools: la version 27

(qui comme le disait le tuto était indispensable)

mais le message subsiste....

Wireless Extension

ce soit être autre chose....

 

je continue tout de même le tuto en faisant le opération demandé :

Et là miracle !!!!! G internet !!!!

Jubilant je surf pendant 5min

j'en profite pour charger le pilote de ma nvidia et de l'installer

et je redémare

 

et là.... le pilote de ma nvidia est correctement installé (logique j'ai suivit un tuto)

 

wlan 0 [echec]

ALSA 1.6je crois [OK] [echec] no card sound found

 

Vous l'aurez compris g pas internet ni de son...

 

je change le pilote de ma carte son avec un autre disponible avec celui précédent par défaut

il a moins de fonction (apparament pas de micro)

mais en redémarant au moins g eu du son

 

Si je réexécute l'installation du dongle je perd tout à chaque redémarage et il se déconnecte tout seul

 

Je décide donc de retrouver internet pour celà g voulut installé libsub comme indiqué dans la doc :

 

ibusb-0.1.10a]# ./configure

checking for a BSD-compatible install... /usr/bin/install -c

checking whether build environment is sane... yes

checking for gawk... gawk

checking whether make sets $(MAKE)... yes

checking build system type... i686-redhat-linux-gnu

checking host system type... i686-redhat-linux-gnu

checking for style of include used by make... GNU

checking for gcc... gcc

checking for C compiler default output file name... a.out

checking whether the C compiler works... yes

checking whether we are cross compiling... no

checking for suffix of executables...

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ANSI C... none needed

checking dependency style of gcc... gcc3

checking for a sed that does not truncate output... /bin/sed

checking for egrep... grep -E

checking for ld used by gcc... /usr/bin/ld

checking if the linker (/usr/bin/ld) is GNU ld... yes

checking for /usr/bin/ld option to reload object files... -r

checking for BSD-compatible nm... /usr/bin/nm -B

checking whether ln -s works... yes

checking how to recognise dependent libraries... pass_all

checking how to run the C preprocessor... gcc -E

checking for ANSI C header files... yes

checking for sys/types.h... yes

checking for sys/stat.h... yes

checking for stdlib.h... yes

checking for string.h... yes

checking for memory.h... yes

checking for strings.h... yes

checking for inttypes.h... yes

checking for stdint.h... yes

checking for unistd.h... yes

checking dlfcn.h usability... yes

checking dlfcn.h presence... yes

checking for dlfcn.h... yes

checking for g++... g++

checking whether we are using the GNU C++ compiler... yes

checking whether g++ accepts -g... yes

checking dependency style of g++... gcc3

checking how to run the C++ preprocessor... g++ -E

checking for g77... no

checking for f77... no

checking for xlf... no

checking for frt... no

checking for pgf77... no

checking for fort77... no

checking for fl32... no

checking for af77... no

checking for f90... no

checking for xlf90... no

checking for pgf90... no

checking for epcf90... no

checking for f95... no

checking for fort... no

checking for xlf95... no

checking for ifc... no

checking for efc... no

checking for pgf95... no

checking for lf95... no

checking for gfortran... no

checking whether we are using the GNU Fortran 77 compiler... no

checking whether accepts -g... no

checking the maximum length of command line arguments... 32768

checking command to parse /usr/bin/nm -B output from gcc object... ok

checking for objdir... .libs

checking for ar... ar

checking for ranlib... ranlib

checking for strip... strip

checking if gcc static flag works... yes

checking if gcc supports -fno-rtti -fno-exceptions... no

checking for gcc option to produce PIC... -fPIC

checking if gcc PIC flag -fPIC works... yes

checking if gcc supports -c -o file.o... yes

checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes

checking whether -lc should be explicitly linked in... no

checking dynamic linker characteristics... GNU/Linux ld.so

checking how to hardcode library paths into programs... immediate

checking whether stripping libraries is possible... yes

checking if libtool supports shared libraries... yes

checking whether to build shared libraries... yes

checking whether to build static libraries... yes

configure: creating libtool

appending configuration tag "CXX" to libtool

checking for ld used by g++... /usr/bin/ld

checking if the linker (/usr/bin/ld) is GNU ld... yes

checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes

checking for g++ option to produce PIC... -fPIC

checking if g++ PIC flag -fPIC works... yes

checking if g++ supports -c -o file.o... yes

checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes

checking dynamic linker characteristics... GNU/Linux ld.so

checking how to hardcode library paths into programs... immediate

checking whether stripping libraries is possible... yes

appending configuration tag "F77" to libtool

checking for what USB OS support... Linux

checking for gcc... (cached) gcc

checking whether we are using the GNU C compiler... (cached) yes

checking whether gcc accepts -g... (cached) yes

checking for gcc option to accept ANSI C... (cached) none needed

checking dependency style of gcc... (cached) gcc3

checking whether gcc and cc understand -c and -o together... yes

checking for a BSD-compatible install... /usr/bin/install -c

checking for ANSI C header files... (cached) yes

checking for vprintf... yes

checking for _doprnt... no

checking for an ANSI C-conforming const... yes

checking whether byte ordering is bigendian... no

checking limits.h usability... yes

checking limits.h presence... yes

checking for limits.h... yes

checking for unistd.h... (cached) yes

checking values.h usability... yes

checking values.h presence... yes

checking for values.h... yes

checking for memmove... yes

checking if we should build the documentation... auto

checking for jade... no

checking for openjade... no

checking for Doxygen tools... checking for dot... not found

checking for doxygen... not found

configure: WARNING: Documentation build components not installed. sgml docs will not be built

configure: creating ./config.status

config.status: creating Makefile

config.status: creating doc/Makefile

config.status: creating libusb.spec

config.status: creating libusb-config

config.status: creating tests/Makefile

config.status: creating README

config.status: creating INSTALL.libusb

config.status: creating usb.h

config.status: creating config.h

config.status: config.h is unchanged

config.status: executing depfiles commands

config.status: executing default commands

 

malgrès des massage d'erreur : les no succésif je continue

 

make install

Making install in .

make[1]: Entering directory `/home/xavier/libusb-0.1.10a'

if /bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT usb.lo -MD -MP -MF ".deps/usb.Tpo" -c -o usb.lo usb.c; \

then mv -f ".deps/usb.Tpo" ".deps/usb.Plo"; else rm -f ".deps/usb.Tpo"; exit 1; fi

gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT usb.lo -MD -MP -MF .deps/usb.Tpo -c usb.c -fPIC -DPIC -o .libs/usb.o

gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT usb.lo -MD -MP -MF .deps/usb.Tpo -c usb.c -o usb.o >/dev/null 2>&1

if /bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT error.lo -MD -MP -MF ".deps/error.Tpo" -c -o error.lo error.c; \

then mv -f ".deps/error.Tpo" ".deps/error.Plo"; else rm -f ".deps/error.Tpo"; exit 1; fi

gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT error.lo -MD -MP -MF .deps/error.Tpo -c error.c -fPIC -DPIC -o .libs/error.o

gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT error.lo -MD -MP -MF .deps/error.Tpo -c error.c -o error.o >/dev/null 2>&1

if /bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT descriptors.lo -MD -MP -MF ".deps/descriptors.Tpo" -c -o descriptors.lo descriptors.c; \

then mv -f ".deps/descriptors.Tpo" ".deps/descriptors.Plo"; else rm -f ".deps/descriptors.Tpo"; exit 1; fi

gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT descriptors.lo -MD -MP -MF .deps/descriptors.Tpo -c descriptors.c -fPIC -DPIC -o .libs/descriptors.o

gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT descriptors.lo -MD -MP -MF .deps/descriptors.Tpo -c descriptors.c -o descriptors.o >/dev/null 2>&1

if /bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT linux.lo -MD -MP -MF ".deps/linux.Tpo" -c -o linux.lo linux.c; \

then mv -f ".deps/linux.Tpo" ".deps/linux.Plo"; else rm -f ".deps/linux.Tpo"; exit 1; fi

gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT linux.lo -MD -MP -MF .deps/linux.Tpo -c linux.c -fPIC -DPIC -o .libs/linux.o

gcc -DHAVE_CONFIG_H -I. -g -O2 -g -Wall -MT linux.lo -MD -MP -MF .deps/linux.Tpo -c linux.c -o linux.o >/dev/null 2>&1

/bin/sh ./libtool --mode=link gcc -g -O2 -g -Wall -o libusb.la -rpath /usr/local/lib -version-info 8:2:4 -release 0.1 -export-dynamic usb.lo error.lo descriptors.lo linux.lo

rm -fr .libs/libusb-0.1.so.4 .libs/libusb-0.1.so.4.4.2 .libs/libusb.a .libs/libusb.la .libs/libusb.lai .libs/libusb.so

gcc -shared .libs/usb.o .libs/error.o .libs/descriptors.o .libs/linux.o -Wl,-soname -Wl,libusb-0.1.so.4 -o .libs/libusb-0.1.so.4.4.2

(cd .libs && rm -f libusb-0.1.so.4 && ln -s libusb-0.1.so.4.4.2 libusb-0.1.so.4)

(cd .libs && rm -f libusb.so && ln -s libusb-0.1.so.4.4.2 libusb.so)

ar cru .libs/libusb.a usb.o error.o descriptors.o linux.o

ranlib .libs/libusb.a

creating libusb.la

(cd .libs && rm -f libusb.la && ln -s ../libusb.la libusb.la)

if /bin/sh ./libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -g -O2 -MT usbpp.lo -MD -MP -MF ".deps/usbpp.Tpo" -c -o usbpp.lo usbpp.cpp; \

then mv -f ".deps/usbpp.Tpo" ".deps/usbpp.Plo"; else rm -f ".deps/usbpp.Tpo"; exit 1; fi

g++ -DHAVE_CONFIG_H -I. -g -O2 -MT usbpp.lo -MD -MP -MF .deps/usbpp.Tpo -c usbpp.cpp -fPIC -DPIC -o .libs/usbpp.o

g++ -DHAVE_CONFIG_H -I. -g -O2 -MT usbpp.lo -MD -MP -MF .deps/usbpp.Tpo -c usbpp.cpp -o usbpp.o >/dev/null 2>&1

/bin/sh ./libtool --mode=link g++ -g -O2 -o libusbpp.la -rpath /usr/local/lib -version-info 8:2:4 -release 0.1 -export-dynamic -lusb usbpp.lo

rm -fr .libs/libusbpp-0.1.so.4 .libs/libusbpp-0.1.so.4.4.2 .libs/libusbpp-0.1.so.4.4.2T .libs/libusbpp.a .libs/libusbpp.la .libs/libusbpp.lai .libs/libusbpp.so

g++ -shared -nostdlib /usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1/../../../crti.o /usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1/crtbeginS.o .libs/usbpp.o -Wl,--rpath -Wl,/home/xavier/libusb-0.1.10a/.libs -Wl,--rpath -Wl,/usr/local/lib /home/xavier/libusb-0.1.10a/.libs/libusb.so -L/usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1 -L/usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1/crtendS.o /usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1/../../../crtn.o -Wl,-soname -Wl,libusbpp-0.1.so.4 -o .libs/libusbpp-0.1.so.4.4.2

(cd .libs && rm -f libusbpp-0.1.so.4 && ln -s libusbpp-0.1.so.4.4.2 libusbpp-0.1.so.4)

(cd .libs && rm -f libusbpp.so && ln -s libusbpp-0.1.so.4.4.2 libusbpp.so)

ar cru .libs/libusbpp.a usbpp.o

ranlib .libs/libusbpp.a

creating libusbpp.la

(cd .libs && rm -f libusbpp.la && ln -s ../libusbpp.la libusbpp.la)

make[2]: Entering directory `/home/xavier/libusb-0.1.10a'

test -z "/usr/local/bin" || mkdir -p -- . "/usr/local/bin"

/usr/bin/install -c 'libusb-config' '/usr/local/bin/libusb-config'

test -z "/usr/local/lib" || mkdir -p -- . "/usr/local/lib"

/bin/sh ./libtool --mode=install /usr/bin/install -c 'libusb.la' '/usr/local/lib/libusb.la'

/usr/bin/install -c .libs/libusb-0.1.so.4.4.2 /usr/local/lib/libusb-0.1.so.4.4.2

(cd /usr/local/lib && rm -f libusb-0.1.so.4 && ln -s libusb-0.1.so.4.4.2 libusb-0.1.so.4)

(cd /usr/local/lib && rm -f libusb.so && ln -s libusb-0.1.so.4.4.2 libusb.so)

/usr/bin/install -c .libs/libusb.lai /usr/local/lib/libusb.la

/usr/bin/install -c .libs/libusb.a /usr/local/lib/libusb.a

ranlib /usr/local/lib/libusb.a

chmod 644 /usr/local/lib/libusb.a

PATH="$PATH:/sbin" ldconfig -n /usr/local/lib

----------------------------------------------------------------------

Libraries have been installed in:

/usr/local/lib

 

If you ever happen to want to link against installed libraries

in a given directory, LIBDIR, you must either use libtool, and

specify the full pathname of the library, or use the `-LLIBDIR'

flag during linking and do at least one of the following:

- add LIBDIR to the `LD_LIBRARY_PATH' environment variable

during execution

- add LIBDIR to the `LD_RUN_PATH' environment variable

during linking

- use the `-Wl,--rpath -Wl,LIBDIR' linker flag

- have your system administrator add LIBDIR to `/etc/ld.so.conf'

 

See any operating system documentation about shared libraries for

more information, such as the ld(1) and ld.so( manual pages.

----------------------------------------------------------------------

/bin/sh ./libtool --mode=install /usr/bin/install -c 'libusbpp.la' '/usr/local/lib/libusbpp.la'

libtool: install: warning: relinking `libusbpp.la'

(cd /home/xavier/libusb-0.1.10a; /bin/sh ./libtool --mode=relink g++ -g -O2 -o libusbpp.la -rpath /usr/local/lib -version-info 8:2:4 -release 0.1 -export-dynamic -lusb usbpp.lo )

g++ -shared -nostdlib /usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1/../../../crti.o /usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1/crtbeginS.o .libs/usbpp.o -Wl,--rpath -Wl,/usr/local/lib -L/usr/local/lib -lusb -L/usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1 -L/usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1/crtendS.o /usr/lib/gcc/i586-mandrake-linux-gnu/3.4.1/../../../crtn.o -Wl,-soname -Wl,libusbpp-0.1.so.4 -o .libs/libusbpp-0.1.so.4.4.2

/usr/bin/install -c .libs/libusbpp-0.1.so.4.4.2T /usr/local/lib/libusbpp-0.1.so.4.4.2

(cd /usr/local/lib && rm -f libusbpp-0.1.so.4 && ln -s libusbpp-0.1.so.4.4.2 libusbpp-0.1.so.4)

(cd /usr/local/lib && rm -f libusbpp.so && ln -s libusbpp-0.1.so.4.4.2 libusbpp.so)

/usr/bin/install -c .libs/libusbpp.lai /usr/local/lib/libusbpp.la

/usr/bin/install -c .libs/libusbpp.a /usr/local/lib/libusbpp.a

ranlib /usr/local/lib/libusbpp.a

chmod 644 /usr/local/lib/libusbpp.a

PATH="$PATH:/sbin" ldconfig -n /usr/local/lib

----------------------------------------------------------------------

Libraries have been installed in:

/usr/local/lib

 

If you ever happen to want to link against installed libraries

in a given directory, LIBDIR, you must either use libtool, and

specify the full pathname of the library, or use the `-LLIBDIR'

flag during linking and do at least one of the following:

- add LIBDIR to the `LD_LIBRARY_PATH' environment variable

during execution

- add LIBDIR to the `LD_RUN_PATH' environment variable

during linking

- use the `-Wl,--rpath -Wl,LIBDIR' linker flag

- have your system administrator add LIBDIR to `/etc/ld.so.conf'

 

See any operating system documentation about shared libraries for

more information, such as the ld(1) and ld.so( manual pages.

----------------------------------------------------------------------

test -z "/usr/local/include" || mkdir -p -- . "/usr/local/include"

/usr/bin/install -c -m 644 'usbpp.h' '/usr/local/include/usbpp.h'

test -z "/usr/local/include" || mkdir -p -- . "/usr/local/include"

/usr/bin/install -c -m 644 'usb.h' '/usr/local/include/usb.h'

make[2]: Leaving directory `/home/xavier/libusb-0.1.10a'

make[1]: Leaving directory `/home/xavier/libusb-0.1.10a'

Making install in tests

make[1]: Entering directory `/home/xavier/libusb-0.1.10a/tests'

if gcc -DHAVE_CONFIG_H -I.. -I.. -g -O2 -g -Wall -MT testlibusb.o -MD -MP -MF ".deps/testlibusb.Tpo" -c -o testlibusb.o testlibusb.c; \

then mv -f ".deps/testlibusb.Tpo" ".deps/testlibusb.Po"; else rm -f ".deps/testlibusb.Tpo"; exit 1; fi

/bin/sh ../libtool --mode=link gcc -I.. -g -O2 -g -Wall -o testlibusb testlibusb.o ../libusb.la

gcc -I.. -g -O2 -g -Wall -o .libs/testlibusb testlibusb.o ../.libs/libusb.so -Wl,--rpath -Wl,/usr/local/lib

creating testlibusb

if g++ -DHAVE_CONFIG_H -I.. -g -O2 -MT descriptor_test.o -MD -MP -MF ".deps/descriptor_test.Tpo" -c -o descriptor_test.o descriptor_test.cpp; \

then mv -f ".deps/descriptor_test.Tpo" ".deps/descriptor_test.Po"; else rm -f ".deps/descriptor_test.Tpo"; exit 1; fi

/bin/sh ../libtool --mode=link g++ -g -O2 -o descriptor_test descriptor_test.o ../libusbpp.la

g++ -g -O2 -o .libs/descriptor_test descriptor_test.o ../.libs/libusbpp.so /home/xavier/libusb-0.1.10a/.libs/libusb.so -Wl,--rpath -Wl,/usr/local/lib

creating descriptor_test

if g++ -DHAVE_CONFIG_H -I.. -g -O2 -MT id_test.o -MD -MP -MF ".deps/id_test.Tpo" -c -o id_test.o id_test.cpp; \

then mv -f ".deps/id_test.Tpo" ".deps/id_test.Po"; else rm -f ".deps/id_test.Tpo"; exit 1; fi

/bin/sh ../libtool --mode=link g++ -g -O2 -o id_test id_test.o ../libusbpp.la

g++ -g -O2 -o .libs/id_test id_test.o ../.libs/libusbpp.so /home/xavier/libusb-0.1.10a/.libs/libusb.so -Wl,--rpath -Wl,/usr/local/lib

creating id_test

if g++ -DHAVE_CONFIG_H -I.. -g -O2 -MT find_hubs.o -MD -MP -MF ".deps/find_hubs.Tpo" -c -o find_hubs.o find_hubs.cpp; \

then mv -f ".deps/find_hubs.Tpo" ".deps/find_hubs.Po"; else rm -f ".deps/find_hubs.Tpo"; exit 1; fi

/bin/sh ../libtool --mode=link g++ -g -O2 -o find_hubs find_hubs.o ../libusbpp.la

g++ -g -O2 -o .libs/find_hubs find_hubs.o ../.libs/libusbpp.so /home/xavier/libusb-0.1.10a/.libs/libusb.so -Wl,--rpath -Wl,/usr/local/lib

creating find_hubs

if g++ -DHAVE_CONFIG_H -I.. -g -O2 -MT find_mice.o -MD -MP -MF ".deps/find_mice.Tpo" -c -o find_mice.o find_mice.cpp; \

then mv -f ".deps/find_mice.Tpo" ".deps/find_mice.Po"; else rm -f ".deps/find_mice.Tpo"; exit 1; fi

/bin/sh ../libtool --mode=link g++ -g -O2 -o find_mice find_mice.o ../libusbpp.la

g++ -g -O2 -o .libs/find_mice find_mice.o ../.libs/libusbpp.so /home/xavier/libusb-0.1.10a/.libs/libusb.so -Wl,--rpath -Wl,/usr/local/lib

creating find_mice

if g++ -DHAVE_CONFIG_H -I.. -g -O2 -MT get_resolution.o -MD -MP -MF ".deps/get_resolution.Tpo" -c -o get_resolution.o get_resolution.cpp; \

then mv -f ".deps/get_resolution.Tpo" ".deps/get_resolution.Po"; else rm -f ".deps/get_resolution.Tpo"; exit 1; fi

/bin/sh ../libtool --mode=link g++ -g -O2 -o get_resolution get_resolution.o ../libusbpp.la

g++ -g -O2 -o .libs/get_resolution get_resolution.o ../.libs/libusbpp.so /home/xavier/libusb-0.1.10a/.libs/libusb.so -Wl,--rpath -Wl,/usr/local/lib

creating get_resolution

if g++ -DHAVE_CONFIG_H -I.. -g -O2 -MT hub_strings.o -MD -MP -MF ".deps/hub_strings.Tpo" -c -o hub_strings.o hub_strings.cpp; \

then mv -f ".deps/hub_strings.Tpo" ".deps/hub_strings.Po"; else rm -f ".deps/hub_strings.Tpo"; exit 1; fi

/bin/sh ../libtool --mode=link g++ -g -O2 -o hub_strings hub_strings.o ../libusbpp.la

g++ -g -O2 -o .libs/hub_strings hub_strings.o ../.libs/libusbpp.so /home/xavier/libusb-0.1.10a/.libs/libusb.so -Wl,--rpath -Wl,/usr/local/lib

creating hub_strings

if g++ -DHAVE_CONFIG_H -I.. -g -O2 -MT driver_name.o -MD -MP -MF ".deps/driver_name.Tpo" -c -o driver_name.o driver_name.cpp; \

then mv -f ".deps/driver_name.Tpo" ".deps/driver_name.Po"; else rm -f ".deps/driver_name.Tpo"; exit 1; fi

/bin/sh ../libtool --mode=link g++ -g -O2 -o driver_name driver_name.o ../libusbpp.la

g++ -g -O2 -o .libs/driver_name driver_name.o ../.libs/libusbpp.so /home/xavier/libusb-0.1.10a/.libs/libusb.so -Wl,--rpath -Wl,/usr/local/lib

creating driver_name

make[2]: Entering directory `/home/xavier/libusb-0.1.10a/tests'

make[2]: Rien à faire pour « install-exec-am ».

make[2]: Rien à faire pour « install-data-am ».

make[2]: Leaving directory `/home/xavier/libusb-0.1.10a/tests'

make[1]: Leaving directory `/home/xavier/libusb-0.1.10a/tests'

Making install in doc

make[1]: Entering directory `/home/xavier/libusb-0.1.10a/doc'

make[2]: Entering directory `/home/xavier/libusb-0.1.10a/doc'

make[2]: Rien à faire pour « install-exec-am ».

make[2]: Rien à faire pour « install-data-am ».

make[2]: Leaving directory `/home/xavier/libusb-0.1.10a/doc'

make[1]: Leaving directory `/home/xavier/libusb-0.1.10a/doc'

 

encore des erreurs... Apparament normal puisque tout les script n'a pas été compilé précédement

 

je reteste mon driver

 

ndiswrapper -l

cannot read device descriptor No such device (19)

Installed ndis drivers:

prisma02 driver present, hardware present

 

Une étrange ligne c'est rajouté...

 

je tente encore l'installation de wlan0 :

 

Mais

[root@192 root]# iwconfig

ne me reconnait plus rien :

wlan0 no wireless extensions

 

 

Help !!!!!!!!!!!!! je commence à en avoir marre sa peut pas être si compliqué linux !!!

Pourtant le ligne de commande j'ai compris le principe sa me plait bien !!!

Mais qu'est qui faut que j'installe : un nouveau noyau avec une nouvelle Wireless extension ????????

Modifié le 5 décembre 2005 par Xavprog

[Xavprog]

Fait chier de devoir rebooter à chaque fois que je veut charger un truc!!!!!!!!

[Xavprog]

Fait chier de devoir rebooter à chaque fois que je veut charger un truc!!!!!!!!

 

Besoin d'aide !!!!

[KewlCat]

Est-ce qu'il te serait possible d' ton post, s'il te plait ? Parce qu'il est assez indigeste...

J'ai énormément de mal à y retrouver une info qui nous mettrait sur la voie...

 

La compilation dont tu as copié/collé le log semble s'être bien terminée, mais as-tu désinstallé les anciens puis installé les outils nouvellement compilés avant de faire tes tests ?