Aller au contenu
  • Pas encore inscrit ?

    Pourquoi ne pas vous inscrire ? C'est simple, rapide et gratuit.
    Pour en savoir plus, lisez Les avantages de l'inscription... et la Charte de Zébulon.
    De plus, les messages que vous postez en tant qu'invité restent invisibles tant qu'un modérateur ne les a pas validés. Inscrivez-vous, ce sera un gain de temps pour tout le monde, vous, les helpeurs et les modérateurs ! :wink:

Revenir a un ancien bios??


Lepoete94310

Messages recommandés

Bonjour,

 

En général, pour les mises à jour de bios, tu as besoins de copier les fichiers sur un disquette et booter sur la disquette.

 

Comme je ne suis pas un expert, je te conseil d'attendre les conseils d'un Zébulonien plus aguérri.

 

Bibi

Modifié par bibi_77340
Lien vers le commentaire
Partager sur d’autres sites

Salut,

 

Je n'ai pas de lecteur disquette.

 

Je veux revenir a une version antérieure du bios. Ne vous inquietez pas c'est le bon bios que j'ai pris.

 

Il y avait ça avec:

 

Award BIOS Flash Procedure

(Special Thanks to Forum Moderator Bas for his valuable contribution)

1. Check your BIOS for BIOS FLASH DISABLED and ENABLE it, some boards have this function.

For Example:

K7N420 Pro (MS-6373) – BIOS setup/Integrated Peripherals/BIOS Protect/Disabled

 

2. Know Your model number

a. Open your case and look for the MS-XXXX number on the motherboard between the PCI slots, also check the version number that is written there as well. (some motherboards are named like K7T Turbo, make sure you have the right version number)

b. Boot up your system & take a look at the top left screen during POST, you should see something like “W6373MS v2.1 122101” This means the board is MS-6373 with BIOS version 2.1

Hint: Many systems are clearing this message very fast, the bios version is then unreadable, you can either press “PAUSE” or disable the “Quick Boot” in the BIOS setup.

 

3. Download the BIOS that matches your motherboard AND version number (some motherboards are named like K7T Turbo, make sure you have the right version number). BIOS can be found according to the CPU type of your board like if your CPU is Intel P4 478 type then look here

http://www.msi.com.tw/support/bios/socket_478.php

if you cannot find the BIOS that matches your board, try here http://www.msi.com.tw/support/bios/more.php

 

4. Extract the BIOS-archive that you have downloaded by double clicking to c:\test

 

5. Boot your system from a Win98 or WinME boot-floppy.

How to make boot floppy in case your don’t have it ready:

For Win9X, You can type [C:\ format a:/s] from the DOS prompt.

For WinMe, You can make a boot floppy from control panel--> add/remove program-->make boot floppy. Remove autoexec.bat & config.sys file if there's any.

For Win2000, there's no way to make boot floppy, so you have to either use Win9X or WinME boot floppy.

For WinXP, you can make a DOS boot disk. Go to Your Computer, right click drive A:, select Format, select copy system files. 

 

7. When you get the A:\ prompt, type the following sequence:

C: <enter>

cd\test <enter>

C:\test> awdfl783m BIOS file

(to save or not to save old BIOS is the user’s decision)

 

8. Reboot your system when prompted

 

Je ne suis pas très fort en anglais. De plus je ne sais pas comment faire un cd bootable sous MS DOS.

Lien vers le commentaire
Partager sur d’autres sites

Normalement tu peux flasher le bios dans Liveupdate à partir d'une image du bios (celle que tu as déjà téléchargé). Par contre j'ai pas de carte MSI pour te dire ou ca peut se trouver comme option de même que je ne sais pas si les versions recentes de Liveupdate permette encore celà.

Lien vers le commentaire
Partager sur d’autres sites

Rejoindre la conversation

Vous publiez en tant qu’invité. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.
Remarque : votre message nécessitera l’approbation d’un modérateur avant de pouvoir être visible.

Invité
Répondre à ce sujet…

×   Collé en tant que texte enrichi.   Coller en tant que texte brut à la place

  Seulement 75 émoticônes maximum sont autorisées.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédent a été rétabli.   Vider l’éditeur

×   Vous ne pouvez pas directement coller des images. Envoyez-les depuis votre ordinateur ou insérez-les depuis une URL.

  • En ligne récemment   0 membre est en ligne

    • Aucun utilisateur enregistré regarde cette page.
×
×
  • Créer...