A propos du Thermalright SI 97

[Funky-Fresh]

C'est un dissipateur a heatpipes. vu comme il est fait il a l'air d'etre concu pour des cartes meres horizontales:

http://www.systemcooling.com/thermalright_si-97-01.html

question: est-il aussi efficace sur nos cartes meres verticales? Si le liquide doit redescendre par gravite j'ai du mal a concevoir que ce soit aussi efficace....

[Funky-Fresh]

J'ai posé ma question directement à Thermalright hier soir et ils m'ont deja repondu, pour ceux que ca interesse, voici leur reponse:

 

Hi Julien,

 

SI-97 can be used in cases with different orientation without impact on performance due to better engineered heatpipes and a low power consumption processor (less than 80watt) .

 

SI-97 unlike its old brother SP-97 or SLK-947, does not require four holes around socket to mount.  It comes with a three point clip that use the six lugs on socke to mount just like the stocket cooler came with processor.

 

Whether a low noise / low cfm fan @ 5V can be used is difficult to answer.  It really depends on the default CFM/RPM of the fan your choose (at 12V) and airflow mananagement inside of your case.  Since the fan does not come with a speed controller, I would suggest any fan that gives similar output at 5V as the Panaflo L1A fan we recommend as shown in SI-97 product page.

 

Thank you for taking interest in Thermalright!

 

 

Thermalright,

 

Ils sont quand meme cools chez Thermalright

[lordtoniok]

waip sont bien gentils...

mais bon si seulemet faisait le xp120 pour socket A .....